Subaru Impreza rear brake pad replacement

Are you the owner of a Subaru Impreza seeking new rear brake pads? We’ll walk you through the procedure and give you all the knowledge you need to correctly change the brake pads on your Subaru Impreza in this post.

This step-by-step tutorial will give you the confidence to complete this work yourself and will save you money by avoiding costly dealership expenses, regardless of whether you are an experienced DIY mechanic or a novice who has never replaced brake pads.

Subaru Brake Pad Replacement Cost

Before we dive into the process, let’s address the cost aspect of Subaru brake pad replacement. The cost can vary depending on various factors such as your location, the type and brand of brake pads you choose, and whether you choose to do it yourself or take your vehicle to a mechanic.

On average, you can expect to spend anywhere between $100 and $300 for a subaru impreza rear brake pad replacement, including parts and labor.
Now, let’s get into the step-by-step process of replacing the rear brake pads on your Subaru Impreza.

Step 1: Gather the necessary Tools and Materials

To begin, make sure you have the following tools and materials ready:

• Jack and jack stands
• Lug wrench
• C-clamp or brake caliper piston tool
• Socket and ratchet set
• Brake cleaner or brake parts cleaner
• Brake lubricant (such as silicone-based grease)
• New brake pads

Step 2: Prepare your Subaru Impreza

Park your vehicle on a flat and level surface, engage the parking brake, and chock the front wheels to ensure safety. If you have a manual transmission, put it in gear or engage the parking brake.

Step 3: Loosen the Lug Nuts

Using the lug wrench, loosen the lug nuts on the rear wheels of your Subaru Impreza. Only loosen the lug nuts at this stage; do not remove them completely.

Step 4: Raise and Secure your Vehicle

Position the jack at the recommended jack points indicated in your Subaru Impreza’s owner’s manual. Carefully raise the rear of your vehicle until the wheels are off the ground. Once raised, secure the vehicle with jack stands for added safety.

Step 5: Remove the Wheels

Now that your vehicle is securely raised and supported, remove the lug nuts completely and take off the rear wheels. Place them aside in a safe location.

Step 6: Remove the Brake Caliper

Locate the brake caliper behind the brake rotor. It is held in place by bolts or pins. Using the appropriate socket and ratchet, remove these bolts or pins and carefully remove the brake caliper from the brake rotor. Be cautious not to let the caliper hang by the brake hose as it may cause damage.

Step 7: Replace the Brake Pads

With the brake caliper removed, you can now access the brake pads. Take note of how the old pads are positioned and use a C-clamp or brake caliper piston tool to compress the caliper piston back into its housing. Remove the old brake pads and replace them with the new ones, ensuring they are properly aligned.

Step 8: Reassemble the Brake Caliper

Apply a thin layer of brake lubricant to the brake pad backing plates and any contact points. Then, reattach the brake caliper to the brake rotor, securing it with the bolts or pins you previously removed. Tighten them to the manufacturer’s specified torque.

Step 9: Repeat Steps 6 to 8 for the Other Side

Repeat steps 6 to 8 on the other side of your Subaru Impreza, as both sides of the rear brakes will require replacement.

Step 10: Put the Wheels Back On

Reinstall your Subaru Impreza’s wheels by aligning the lug nut holes with the wheel studs. Finger-tighten the lug nuts as much as possible.

Step 11: Lower your Vehicle and Tighten the Lug Nuts

Carefully lower your vehicle back to the ground using the jack. Once it is lowered, use the lug wrench to tighten the lug nuts in a star or criss-cross pattern. Ensure they are tightened to the manufacturer’s recommended torque specification.
Congratulations! You have successfully replaced the rear brake pads on your Subaru Impreza. Take your vehicle for a test drive and ensure that the brakes are functioning properly.

Subaru Brake Pad Replacement Cost

Now that you know how to replace the rear brake pads in your Subaru Impreza, let’s discuss the cost associated with this maintenance procedure.

The cost of Subaru brake pad replacement can vary depending on several factors, including the model year, your location, and whether you choose to do it yourself or have it done by a professional.

On average, the cost of replacing rear brake pads in a Subaru Impreza ranges from $150 to $300, including parts and labor. DIY enthusiasts can save money by purchasing aftermarket brake pads instead of OEM ones, which are generally more expensive.

However, it’s important to note that quality should not be compromised when choosing brake pads, as subpar products can affect the safety and performance of your vehicle.

In conclusion, replacing the rear brake pads on your Subaru Impreza is a task that can be accomplished with the right tools, materials, and a little bit of patience.

By following this step-by-step guide, you can save money on dealership costs and gain the satisfaction of maintaining your vehicle yourself. Remember to always consult your Subaru Impreza’s owner’s manual for specific instructions and torque specifications.

Now, go ahead and give your Subaru Impreza the care it deserves by replacing those worn-out brake pads! Happy DIY maintenance!